A. Abdul-Rassol, Adnan
Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]
A. Abed, Kadhum
Develop QFD and AHP Models for Liquid Gas Valve for Product Developmen [Volume 11, Issue 1, 2020, Page 25-32]
A. Abedc, Kadhemm.
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
A.A.Duroobi, Ahmed
Free-Form Surfaces Design Using Reverse Engineering Depending on Cross-Sectional Design Method [Volume 5, Issue 1, 2012, Page 41-50]
A.A.Duroobi, Ahmed
Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]
A. Ahmed, Mohammed
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
A. Ahmed, Mohammed
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
A. Ahmed, Mohammed
NUMERICAL STUDY OF NATURAL CONVECTION IN HORIZONTAL ECCENTRIC ANNULUS [Volume 1, Issue 2, 2008, Page 27-38]
A. Ahmed, Mohammed
AIDING AND OPPOSING MIXED CONVECTION FROM AN ARRAY OF CIRCULAR CYLINDERS IN A SATURATED POROUS MEDIUM [Volume 1, Issue 2, 2008, Page 15-26]
A. Ahmed, Mohammed
On the Effect of Flow Direction on Mixed Convection from a Horizontal Cylinder in a Saturated Porous Medium [Volume 1, Issue 1, 2008, Page 77-87]
A. Ahmed a, M.
Numerical Study on the Convective Heat Transfer of Nanofluid Flow in Channel with Trapezoidal Baffles [Volume 9, Issue 1, 2018, Page 185-194]
A. Al Falahi, Hamed
Improvement of General Properties of Thermal Insulators Prepared from Syrian Locally Raw Kaolin [Volume 3, Issue 2, 2010, Page 91-111]
A. Ali, Raed
Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]
A. Al- Janabi, Ibrahim
Study of Quality Control of A Survey Work in Construction Projects Case Study ( AL Rahman Mosque) [Volume 1, Issue 1, 2008, Page 143-159]
A. Al-Taher, Mohanad
Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]
A.A Mohammed, Kafel
Thermomechanical Fatigue Damage Model for Life prediction of Navel Copper Alloy [Volume 4, Issue 2, 2011, Page 70-79]
A. Awad, Hamid
Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]
Abbas, Ahmed Khudhair
Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]
Abbas Al-Saraf, Saad
Thermomechanical Fatigue Damage Model for Life prediction of Navel Copper Alloy [Volume 4, Issue 2, 2011, Page 70-79]
Abbood, Mohanad Qusay
Prediction of Surface Quality in Electrical Discharge Machining Process for 7024 AL Alloy Using Artificial Neural Network Model [Volume 13, Issue 2, 2022, Page 106-113]
Abd, Duraid M.
The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]
Abd, Duraid M.
Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]
Abd, Osama Ibrahim
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Abd, R.
Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]
Abdalhameed, Abdalsattar M.
Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]
Abdul Amir K, Nawal
Contemporary Arabic ArchitectureAnd It’s Local Specialism [Volume 3, Issue 2, 2010, Page 125-144]
Abdulghafor, Israa Ali
Enhancing the effectiveness of the cooling system for automotive engine by employing different nanofluids: literature review [Volume 13, Issue 1, 2022, Page 53-58]
Abdulhameed, Isam M.
Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]
Abdulhameed, Isam M.
Minimizing Evaporation Losses from Small Reservoirs (Wadi Houran-case study) [Volume 12, Issue 1, 2021, Page 76-82]
Abdul-Jaleel, Tariq
A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]
Abdul-jalel Mandeel, Tariq-
Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]
Abdulkareem, Ahmed H.
The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]
Abdulla, Aziz Ibraheem
EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]
Abdullah, Ali Hamid
Evaluating the Effect of Supplementary Irrigation on Improvement of Economic Water Productivity for Winter Wheat [Volume 11, Issue 1, 2020, Page 60-65]
Abdullah, Aseel Satar
Using Deep-Learning Algorithm to Determining safe areas for Injecting Cosmetic Fluids into The Face: A survey [Volume 14, Issue 1, 2023, Page 73-79]
Abdul-Lateef Al-Shemary, Ahmed
Two Dimensional Wavelet Transform Model for OFDM System [Volume 2, Issue 2, 2009, Page 58-68]
Abdul-Latiff, Nawal Ezzat
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Abdulrahman Hilal, Ameer
Effect of Crumb Tyres Rubber on Some Properties of Foamed Concrete [Volume 4, Issue 2, 2011, Page 1-17]
Abdulrazzaqb, Sinan Salah
Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]
Abdulridha, Hind H.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
Abdulsattar, Fatimah S.
New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]
Abdul Wahid, Maryam Khalid
Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]
Abdulwahid Salman, Muntaser
ANN Based Detection and Location of Severe Three Phase Trip on the Transmission Lines of an Uncontrolled Power System [Volume 2, Issue 1, 2009, Page 36-48]
Abed, Adil N.
Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]
Abed, Basim Sh.
Numerical Modelling and Experimental Investigation of Water Distribution in Stratified Soil Under Subsurface Trickle [Volume 11, Issue 2, 2020, Page 94-101]
Abed, Kadhum Ahmed
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Abed, Waleed M.
Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]
Abed Ahmed a, Mohammed
Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]
Adham, Ammar
Simulation of Storm Sewer Network Using a Storm Water Man-agement Model (SWMM), Ramadi City as a Case Study [Volume 12, Issue 1, 2021, Page 83-89]
Adnan Al-Kindia, Luma
Multi-Objective GA-Based Optimization to Maximize Sustainability for Product Design and Manufacturing [Volume 9, Issue 1, 2018, Page 195-201]
A. Faraj, Yahya
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
A. Fayath, Mohamaad
Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]
A. Hassan, Ibtisam
Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]
Ahmad, Nahla Yassub
Assessment Performance at Al- Thawra Signalized Intersection in Babil City [Volume 13, Issue 2, 2022, Page 84-90]
Ahmad Abed, Kadham
Prognostic Reliability Prediction for Repairable System Based on Non- Parametric Model [Volume 7, Issue 1, 2016, Page 42-49]
Ahmadb, Sara Mohamad
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Ahmed, Ahmed Mohmmed
EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]
Ahmed, Hamdi E.
Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]
Ahmed, Hamdi E.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
Ahmed, Lamiaa
Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]
Ahmed, M. A.
Numerical Investigation on heat transfer enhancement and entropy generation in a triangular ribbed-channel using nanofluid [Volume 12, Issue 1, 2021, Page 65-75]
Ahmed, M. A.
Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]
Ahmed, Mohammed Lateef
Dam and Reservoir System Management based on Genetic Algorithms [Volume 13, Issue 1, 2022, Page 46-52]
Ahmed, Mohammed A.
Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]
Ahmed, Mohammed Akram
Comprehensive review study for the effect of utilizing waste materials on the thermal conductivity of concretes [Volume 12, Issue 2, 2021, Page 113-120]
Ahmed, Mr. Hussein A.
Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]
Ahmed, Sapan Jabar Faqe
IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]
Ahmed, Shamil K.
Numerical Investigations of Bond-Slip Performance in Pull-Out High Strength Concrete Specimens Subjected to Elevated [Volume 12, Issue 1, 2021, Page 20-28]
Ahmed Abbas, Rafal
Speed Flow Density Models Prediction for Urban Roadway in Falluja City [Volume 4, Issue 1, 2011, Page 1-16]
Ahmed Yassen, Tadahmun
Experimental and Theoretical Study of a Parabolic Trough Solar Collector [Volume 5, Issue 1, 2012, Page 109-125]
Alabdaly a, Ibrahim K.
Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]
Alamery, Mohammed Saeed
Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]
Alashaab, Ahmed Ali Najeeb
Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]
Albadran, Fatma
Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]
ALBayati, Noor Nazar
OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]
Alboresha, Rafid
Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic Structures [Volume 12, Issue 1, 2021, Page 1-9]
Al-duroobi, Ahmed A.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
Al-Hadithi, Abdulkader Ismail
Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]
Al-Hadithi, Bevian Ismail
Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]
Al-Hassania, Emad S.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Alhussein, Thamer Hussein
Shear Strength of Directly and Indirectly Loaded Rectangular Self - Compacted Reinforced Concrete Deep Beams Containing Recycled Concrete as Coarse Aggregate [Volume 11, Issue 2, 2020, Page 121-129]
Ali, Ahmed Y.
On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review [Volume 15, Issue 1, 2024, Page 54-68]
Ali, Amer Mejbel
Thermal Analysis of Switched Reluctance Motor Based on RMXprt/Motor-CAD [Volume 14, Issue 1, 2023, Page 7-14]
Ali, Amer Mejbel
Performance Assessment of Universal Motor with AC and DC Supply [Volume 15, Issue 1, 2024, Page 69-76]
Ali, Ammar Yasir
Effect of Duration and Intensity of Burning on Columns Exposure to Cyclic Fire [Volume 13, Issue 2, 2022, Page 91-98]
Ali, Asaad K.
Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]
Ali, Atheer Muhammed
Distracted Driving Using Mobile Phone [Volume 12, Issue 2, 2021, Page 211-221]
Ali, H.
Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]
Ali, Harith M.
Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]
Ali, Mazin N.
Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans [Volume 11, Issue 1, 2020, Page 38-42]
Ali Akber, E.
Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]
Ali Hasan, Atif
Thermal Behavior of Present and Future Iraqi Constructed Walls (An Experimental Study) [Volume 5, Issue 1, 2012, Page 140-164]
Ali Hussein, Mohammed
Scintillation Effect on Satellite Communications within Standard Atmosphere [Volume 2, Issue 2, 2009, Page 17-27]
Ali Najeeb, Ahmed
Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]
Ali Wannas, Akeel
Nonlinear Response of Uniformly Loaded Paddle Cantilever Based upon Intelligent Techniques [Volume 4, Issue 2, 2011, Page 60-69]
Aljanabi, Khalid R.
Using water treatment sludge to Improve Geotechnical Engineering Properties of Soils: A Review [Volume 14, Issue 1, 2023, Page 50-65]
Aljanabi, Khalid R.
Prediction Load-Settlement of Bored PileS Using Artificial Neural Network [Volume 15, Issue 1, 2024, Page 17-24]
Al Jubair, Dr. Haider S.
Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]
Alkbir, M.F. M.
Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]
AL-Khafaji, Ali Mohsen
The Integration Between the Structural System and the Envelope System in Earthquake Resistance Design [Volume 11, Issue 1, 2020, Page 79-93]
Almabrouk, Munir Faraj
On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review [Volume 15, Issue 1, 2024, Page 54-68]
Al Mansoor, Iman
Improvement of General Properties of Thermal Insulators Prepared from Syrian Locally Raw Kaolin [Volume 3, Issue 2, 2010, Page 91-111]
Almasraf, Sabah Anwer
Evaluating the Effect of Supplementary Irrigation on Improvement of Economic Water Productivity for Winter Wheat [Volume 11, Issue 1, 2020, Page 60-65]
Al-Obaidi, Ahmed Ramadhan
Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]
Alrawi, Mashael A.
Strengthening Reinforced Beams Subjected to Pure Torsion by Near Surface Mounted Rebars [Volume 13, Issue 1, 2022, Page 13-22]
Alrawi, Mashael A.
Torsional Behavior of Strengthened Reinforced Concrete Beams by CFRP Sheets: Parametric study [Volume 12, Issue 2, 2021, Page 229-244]
ALSaad, Zainb
Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]
Al-Sabe’a, Balsam M.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Al-Sakini, Dr. Sahar R.
Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]
Al-Somaydaii, J.
Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]
Al-Soudany, K.Y.
Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]
Alwani, Khalid Hardan
Evaluation the effect of some traffic characteristics on the safety performance of intersections. [Volume 11, Issue 2, 2020, Page 130-136]
Al-Zubaidi, Salam
3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]
Al-Zuheri, Atiya
3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]
A.M. Habib, Nasser
Preparation a Composite Material (UP/Cann F) with Evaluation Its Toughness Under the Influence of Temperature and Humidity. [Volume 5, Issue 2, 2012, Page 198-208]
A.M.Jawad b, Dr. David
Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]
A. Mohammed, Hameed
Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]
A. MOULOOD, IBTIHAL
Hydraulic Analysis of Fallujah Water Network By Using a Program EPANET [Volume 3, Issue 2, 2010, Page 112-124]
A.M.Saleh, Ahmed
Thermal Performance of a Heat Pipe with Sintered Powder Metal Wick Using Ethanol and Water as Working Fluids [Volume 4, Issue 1, 2011, Page 62-71]
A. Mutlk, Sattar
Preparing a PLC Program for the Kiln Entrance of Ceramic [Volume 2, Issue 2, 2009, Page 82-94]
A. Ramadhan, Abdulmajeed
Numerical Study of Fluid Flow and Heat Transfer over a Bank of Oval-Tubes Heat Exchanger with Vortex Generators [Volume 5, Issue 1, 2012, Page 88-108]
Arslan, Chelang A.
OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]
A.R Yass, Muhammad.
Effect of Paving Runway and Atmospheric Conditions on Airplane Takeoff Distance and Time [Volume 10, Issue 2, 2019, Page 382-392]
A. S. Al-Jumaily, Ibrahim
Some Mechanical Properties of Reactive PowderLight Weight Concrete [Volume 4, Issue 1, 2011, Page 47-61]
A. Sulaiman, Zeyad
Effect of Soil Bulk Density on Wetting Front AdvanceUnder a Trickle Line Source [Volume 3, Issue 2, 2010, Page 78-90]
A. Tawfiq, Mohammed
Key Exchange Protocol Supporting Mobility and Multihoming [Volume 1, Issue 1, 2008, Page 11-30]
Atiyab, Halla
Multi-Objective GA-Based Optimization to Maximize Sustainability for Product Design and Manufacturing [Volume 9, Issue 1, 2018, Page 195-201]
Awad, Hamid
The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]
Awad, Hamid A.
Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]
Awad Salman, Salah
Image Compression Using Vector Quantization and Genetic Algorithms [Volume 1, Issue 1, 2008, Page 45-58]
A. Yousif, Mustafa
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]
Azeez, Ali Nur eldeen
The Integration Between the Structural System and the Envelope System in Earthquake Resistance Design [Volume 11, Issue 1, 2020, Page 79-93]
Aziz, Mand Ibrahim
The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]
B
Bahaadin Noory Zangana, Dhiaadin
The Effect Of Sodium Hydroxide On The Strength Of Kirkuk Soil – Cement Mixtures [Volume 5, Issue 2, 2012, Page 258-270]
B. Al-hadithi, Mustafa
Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]
B. Al-Hadithi, Mustafa
Use of Phase Change Material in Residential Walls to Reduce Cooling Load [Volume 4, Issue 1, 2011, Page 72-86]
Barakat, Fysal
Improvement of General Properties of Thermal Insulators Prepared from Syrian Locally Raw Kaolin [Volume 3, Issue 2, 2010, Page 91-111]
Battal Najim, Khalid
Effect of Admixture Type on Compressive Strength and Modulus of Elasticity of Rubber- Tire - Waste Concrete [Volume 1, Issue 1, 2008, Page 88-103]
Battal Najim, Khalid
Suggested Method To Dealing With Site Course Aggregate To Product Best Concrete [Volume 2, Issue 1, 2009, Page 96-111]
Brethee, Khaldoon
Hoff's Investigation of The Sandwich Panel with Honeycomb Core [Volume 13, Issue 2, 2022, Page 63-68]
C
Chkheiwer, Aqeel H.
A Neural Model to Estimate Carrying Capacity of Rectangular Steel Tubular Columns Filled with Concrete [Volume 11, Issue 2, 2020, Page 192-201]
D
Dawood, Ali Jubeir
Using Deep-Learning Algorithm to Determining safe areas for Injecting Cosmetic Fluids into The Face: A survey [Volume 14, Issue 1, 2023, Page 73-79]
Dawood, Ammar Salman
The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]
Dawood, H. K.
Comprehensive review study for the effect of utilizing waste materials on the thermal conductivity of concretes [Volume 12, Issue 2, 2021, Page 113-120]
Dawood, H. K.
Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]
Dawood, Jamal J.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Dawood, Lamyaa Mohammad
Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]
Dawood, Lamyaa Mohammed
Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]
Dawood, Lamyaa Mohammed
The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]
Dawooda, H. K.
Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]
E
E. Ahmed, Hamdi
Numerical Investigation of Hydrothermal Performance of Pinned Plate-Fin Microchannel Heat Sink [Volume 9, Issue 1, 2018, Page 210-232]
E. A. Zangana, Hamdi
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
E. A. Zangana, Hamdi
EFFECT OF VORTEX GENERATORS ON A FRICTION FACTOR IN AN EQUILATERAL TRIANGULAR DUCT [Volume 1, Issue 2, 2008, Page 78-86]
E. Aziz, Khalil
Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]
E. H. Kassam, A.
Proportional Odds Nonparametric Accelerated Life Test for Reliability Prediction: An overview [Volume 5, Issue 1, 2012, Page 31-40]
Ejbari,
ANALYSIS OF MULTI-LAYER COMPOSITE SIMPLY SUPPORTED BEAM UNDER BLAST LOADING [Volume 1, Issue 2, 2008, Page 98-117]
Essa, Shivan Sarbast
The impact of Salutogenic factors on the process of patient’s recovery Case study; Erbil city hospitals [Volume 11, Issue 2, 2020, Page 137-153]
E.Zangana, Hamid
Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]
Ezzy, Nidaa
THE EFFECT OF NOISE STUDY AT CITY PLANNING FOR SPECIFYING THE USES OF LAND [Volume 1, Issue 2, 2008, Page 133-142]
Ezzy, Nidaa
STUDING THE PRINCIPAL VARIABLES AT THE AUDITORIUM ROOMS TO SPECIFY THE COUSTIC PERFORMANCE EFFECIENCY [Volume 1, Issue 2, 2008, Page 163-179]
F
Fadhil, Obaid T.
Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]
Fadhil, Obaid T.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
Fahad Frayyeh, Hatem
Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]
Falih, Hazim
Effect of Fire Clay Powder on The Properties of Ceramic Materials Produced by Using Kaolin [Volume 3, Issue 2, 2010, Page 72-77]
Farhan, Thaer H.
Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]
Farhood, Naseer
Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]
Faris, Mariwan Ridha
Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]
Faroon, Maha Atta
The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]
Faroon, Maha Atta
Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]
Farraj Muslim, Rasim
Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]
Fayyadh, Muthanna Ismaeel
Experimental and simulation investigation of porous Functionally Graded beam under bending loading [Volume 14, Issue 1, 2023, Page 98-107]
F. Breithe, Khaldon
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
F. Breithe, Khaldon
FREE VIBRATION ANALYSIS OF A CANTILEVER CRACKED BEAM WITH SUBSTRUCTURE ATTACHMENT [Volume 1, Issue 2, 2008, Page 39-50]
F. Brethee, Khaldoon
Free Vibration Analysis of Clamped Laminated Composite Plates with Centeral Crack [Volume 12, Issue 1, 2021, Page 108-115]
F. Hatem, Falah
Enhancement of Adiabatic Film Cooling Effectiveness by Using Conical Shape Hole [Volume 6, Issue 2, 2013, Page 465-478]
F. Ojaimi, Mohammed
A Neural Model to Estimate Carrying Capacity of Rectangular Steel Tubular Columns Filled with Concrete [Volume 11, Issue 2, 2020, Page 192-201]
G
Gaeid, Khalaf
Review and Case Study on Control of Induction Motor Using High-Level Converter [Volume 15, Issue 1, 2024, Page 41-53]
Gatea a, Maytham Khalid
Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]
Ghazi, Safaa Kadhim
Study the Effect of Cutting Parameters of Abrasive Water Jet Process on Aluminum Alloy 5083 [Volume 13, Issue 2, 2022, Page 99-105]
Ghazi, Safaa
Investigation of Surface Quality in Bezier Technique for Machining Al7025 Alloy Using CNC Turning [Volume 14, Issue 2, 2023, Page 1-11]
Ghazi Hammed, Mohammed
Effect of water on impact strength for unsaturated polyester composites reinforced with E-glass fibers [Volume 5, Issue 2, 2012, Page 279-294]
Gh. Jehad, Mohammed
A Numerical Study of Buoyancy Effect on Thermal Development in a Horizontal Annulus Sector [Volume 2, Issue 2, 2009, Page 95-116]
Goker, Hanife
Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]
H
H. Abdul Kareem, Ahmed
Nature of Soil-Water Characteristics Curves (SWCC)for Soils from Anbar Governorate [Volume 3, Issue 1, 2010, Page 61-80]
Haleel, Aseel J.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
H. ALjanabi, Shaker
Design and Performance Prediction of an Axial Flow Compressor [Volume 5, Issue 2, 2012, Page 209-225]
Hamah, Sheelan M.
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
Hamdi, Aya Ali
Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]
Hamid, Mohammed
Using water treatment sludge to Improve Geotechnical Engineering Properties of Soils: A Review [Volume 14, Issue 1, 2023, Page 50-65]
Hammood, Mohammed Taha
EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]
Hareer, S.
Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]
Hasan, Hamad M.
On the vibration and stability investigations of orthotropic FGMs plate and cylindrical shell: A review [Volume 15, Issue 1, 2024, Page 54-68]
Hasan, Hamad M.
Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]
Hasanc, Dler Salih
Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]
Hasan Derwish, Mohammed
Investigation of Frequency Reduction Behavior on Three Phase Synchronous Generator And Transformer [Volume 4, Issue 1, 2011, Page 17-33]
Hashim Hammed El-Eqapy, Ahmed
Utilitarian Dimension For The Relationship of The Individual (Designer)and The Requirements of The Community [Volume 4, Issue 1, 2011, Page 107-130]
Hashim Khalil, Wissam
Modeling and Performance of a Wind Turbine [Volume 1, Issue 1, 2008, Page 116-130]
Hatem, Uday
Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic Structures [Volume 12, Issue 1, 2021, Page 1-9]
Hatem Kamelb, Ammar
Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]
Helal Zgayer, Ajaj
Heat Transfer Enhancement Using Helical Pipes [Volume 5, Issue 1, 2012, Page 126-139]
H. Fadhil, Talal
Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]
H. Gardi, Ramadan
Characterization of Rotary Friction Welded AISI 304 Steel Joints [Volume 11, Issue 2, 2020, Page 202-210]
H. MAJED, NOOR
Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]
Husein, Husein A.
Analyzing kindergarten's Interior Spaces for Enhancing Children's Creativity Erbil City as a Case Study [Volume 13, Issue 1, 2022, Page 85-97]
Hussain, Ahmed Hammad
EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]
Hussain Ibrahem Al-Bayati, Siham
Effect of SiC Addition the on Adhesive Wear Resistance of 6061 T6 Aluminum Alloy [Volume 5, Issue 2, 2012, Page 271-278]
Hussein, Emad Ali
Effect of Cross- Rolling on Mechanical Properties and Spring - Back of Aluminum 6061 Alloy [Volume 14, Issue 2, 2023, Page 12-18]
Hussein, Hashim Abed
The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]
Hussein, Nazhad Ahmad
Dynamic Response of a Cracked Composite Beam subjected to moving Load [Volume 10, Issue 2, 2019, Page 393-398]
Husseina, Nazhad Ahmad
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Husseinb, Nazhad Ahmad
Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]
Hussein Mohammed Al Hilli, Ali
Sheet Formability Using Hemi-Spherical Punch AndRubber Die [Volume 3, Issue 2, 2010, Page 58-71]
Hussenc, Areej H.
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
Hussien, Asmaa S.
Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]
H. Yoosif, Assim.
Enhancement of Adiabatic Film Cooling Effectiveness by Using Conical Shape Hole [Volume 6, Issue 2, 2013, Page 465-478]
I
I. Alkubaisi, Mehdi
Speed Flow Density Models Prediction for Urban Roadway in Falluja City [Volume 4, Issue 1, 2011, Page 1-16]
I. Al-Mashhidiny, Yousif.
Neuro Controller For Time Varying Dynamical System. [Volume 3, Issue 1, 2010, Page 34-48]
I. Aziz, Khaleel
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
I. Aziz, Khaleel
ANALYSIS OF MULTI-LAYER COMPOSITE SIMPLY SUPPORTED BEAM UNDER BLAST LOADING [Volume 1, Issue 2, 2008, Page 98-117]
I. Aziz, Khalel
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
I. Aziz, Khalel
BEHAVIOR OF MULTI-LAYER COMPOSITE CONTINUOUS BEAMS WITH PARTIAL INTERACTION [Volume 1, Issue 2, 2008, Page 51-68]
Ibraheemc, Sura
Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]
Ibrahem Hassan, Mashaan
Effect of Strain Rate on Tensile Fracture Behaviour of Viscoelastic Matrix (EPOXY) and Fiber Reinforced Composites [Volume 1, Issue 1, 2008, Page 104-115]
Ibrahem Hassan, Mashaan
The Effect of the Hollow Ratio on the Natural Convection Heat Transfer from Upward Heated Plates at Constant Heat Flux [Volume 1, Issue 1, 2008, Page 131-142]
Ibrahim, Raheek I.
Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]
Ibrahim, Raheek I.
A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]
Ibrahim, Raheek I.
Preparation and Application of Natural and Low Cost Palm Fibers as an Effective Drag Reducing Agent for Flow Improvement in Iraqi Crude Oil Pipelines [Volume 11, Issue 1, 2020, Page 6-11]
Ibrahim Abaas, Khalil
Practical Investigation for Improving Concentrating Solar Power Stations Efficiency in Iraqi Weathers [Volume 5, Issue 1, 2012, Page 76-87]
Ibrahim Abdulqader, Serwan
Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]
Ibrahim Aziz, Khalil
STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]
I. K, Bahaa
Free Vibration Analysis of Multi-Body System [Volume 3, Issue 1, 2010, Page 1-19]
I. Naif a, Rasha
Minimizing Evaporation Losses from Small Reservoirs (Wadi Houran-case study) [Volume 12, Issue 1, 2021, Page 76-82]
Ismael, Hameed Sarhan
3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]
Ismail Abdul-Wahab, Bevian
Using Quality Statistical Tools in Measuring Quality Properties of Hot Mix Asphaltic Concrete Product for Road Pavement Projects in Baghdad [Volume 3, Issue 1, 2010, Page 81-101]
Ismail Al Hadithi, Bevian
Implications Of Cash Flow Forecasting On Highway Projects In Iraq [Volume 7, Issue 1, 2016, Page 56-62]
I. Yasin, Haqqi
Effect of Soil Bulk Density on Wetting Front AdvanceUnder a Trickle Line Source [Volume 3, Issue 2, 2010, Page 78-90]
J
Jabbari, Adeeb Nuri
The impact of Salutogenic factors on the process of patient’s recovery Case study; Erbil city hospitals [Volume 11, Issue 2, 2020, Page 137-153]
Jaffal, Hayder Mohammad
Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]
Jajjawi, N.
Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]
Jalal, N.
Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]
J.Al-Alkawi, Hussain
Thermomechanical Fatigue Damage Model for Life prediction of Navel Copper Alloy [Volume 4, Issue 2, 2011, Page 70-79]
J. Al-Horan, Khalid
Thermal Stresses Distribution Induced in a Chimney Shell Structure of a Power Plant [Volume 1, Issue 1, 2008, Page 1-10]
Jalil, Saad M.
Experimental Investigation of the Optimum Angle for the Hybrid PV/T Collector [Volume 13, Issue 1, 2022, Page 1-12]
Jamal, J.
Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]
Jameel, Ghassan Subhi
Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]
Jameel Shareef, Amer
Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]
Jameel Shareef, Amir
Study of the Performance Thermal Forced Unglazed Solar Air Collector [Volume 5, Issue 2, 2012, Page 311-332]
Jamel, Omer Monther
Prediction Load-Settlement of Bored PileS Using Artificial Neural Network [Volume 15, Issue 1, 2024, Page 17-24]
Januddi, Fatihhi
Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]
Jarallah, Dr. Husain Khalaf
Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]
Jasim, Nabeel Abdulrazzaq
Torsional Capacity of Composite Reinforced Concrete Beams with Stirrup Connectors [Volume 12, Issue 2, 2021, Page 177-192]
Jasim, Wesam M.
Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]
Jasim Hadi, Arkan
Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]
Jasim Kadhim, Dheyaa
Performance Evaluation of AODV Routing Protocol in MANET using OPNET Simulator [Volume 5, Issue 2, 2012, Page 241-257]
Jasim Mohamed, Samaher
The Study of Temperature Effects On Activated Sludge Stability and it’s Dewaterability by using bioelectricity cell as a treatment unit. [Volume 5, Issue 2, 2012, Page 295-310]
Jassama, Mahmood Gazey
Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]
Jassam Mohammad, Mahasin
The Removal of Iron Oxide From Kaolin Clay by Hydrometallurgy Method [Volume 4, Issue 2, 2011, Page 112-124]
Jassim Harbi, Yahya
A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]
J. Hadi, Ghassan
Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]
J.Jweeg, Muhsin
Transient Analysis of Composite Plates with Different Types of Cutout [Volume 5, Issue 1, 2012, Page 1-21]
J. M. AL-Khishali, Kutaeba
Enhancement of Adiabatic Film Cooling Effectiveness by Using Conical Shape Hole [Volume 6, Issue 2, 2013, Page 465-478]
K
K. Abd, Mohammed
Nonlinear Response of Uniformly Loaded Paddle Cantilever Based upon Intelligent Techniques [Volume 4, Issue 2, 2011, Page 60-69]
K .AbdulKadir, H.
Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]
Kakrasul, Jamal Ismael
Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]
Kamela, Ammar Hatem
Performance Study of Fluent-2D and Flow-3D Platforms in the CFD Modeling of a Flow Pattern Over Ogee Spillway [Volume 11, Issue 2, 2020, Page 221-230]
Kareem, Siham Musheer
The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]
Kareem Jawad, Salah
A Neural Network Cutting Fluid Effect on Surface Roughness and Tool Life [Volume 4, Issue 1, 2011, Page 34-46]
Kassam, A. H.
Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]
Khalaf Yousif, Yousif
A proposed new formula to determine the sound insulation of concrete walls [Volume 2, Issue 2, 2009, Page 117-128]
Khalil, W. H.
Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]
Khalil, Wissam H.
Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]
Khudair, Anat Amer
The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]
Khudairb, Anat Amer
Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]
Khudhair, Jamal Abdul
Shear Strength of Directly and Indirectly Loaded Rectangular Self - Compacted Reinforced Concrete Deep Beams Containing Recycled Concrete as Coarse Aggregate [Volume 11, Issue 2, 2020, Page 121-129]
Kitis, Sukru
Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]
K. Mohammed, Munjid
Numerical Study on the Convective Heat Transfer of Nanofluid Flow in Channel with Trapezoidal Baffles [Volume 9, Issue 1, 2018, Page 185-194]
L
Lateef Saleh, Faek
Estimating Optimum Period of Time Between Maintenances by Using Monte Carlo Simulation Method [Volume 5, Issue 2, 2012, Page 226-240]
Lemanc, Z.
Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]
M
M.A, Husam
Free Vibration Analysis of Multi-Body System [Volume 3, Issue 1, 2010, Page 1-19]
M.A. Al-ani, Taher
Modification of Asphalt Mixture Performance by Rubber-Silicone Additive [Volume 2, Issue 1, 2009, Page 71-81]
M. Abdulhameed, Isam
Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]
M. Abid, Waleed
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
M. Abid, Waleed
NUMERICAL STUDY OF NATURAL CONVECTION IN HORIZONTAL ECCENTRIC ANNULUS [Volume 1, Issue 2, 2008, Page 27-38]
Mahammad, Maath Jasem
New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]
Mahdi, Ali Salah
Assessment Performance at Al- Thawra Signalized Intersection in Babil City [Volume 13, Issue 2, 2022, Page 84-90]
Mahdi Mahmood, Wasan
Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]
Mahmood, Ahmed H.
Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]
Mahmood, Ayad Tariq
Review and Case Study on Control of Induction Motor Using High-Level Converter [Volume 15, Issue 1, 2024, Page 41-53]
Mahmood, Mohammad N.
Strengthening Reinforced Beams Subjected to Pure Torsion by Near Surface Mounted Rebars [Volume 13, Issue 1, 2022, Page 13-22]
Mahmood, Mohammad N.
Torsional Behavior of Strengthened Reinforced Concrete Beams by CFRP Sheets: Parametric study [Volume 12, Issue 2, 2021, Page 229-244]
Mahmood, Th.
A proposed plan for implementing the public transport policy in the city of Ramadi / Anbar University as a model [Volume 12, Issue 1, 2021, Page 90-99]
Mahmood Hama, Sheelan
Some Mechanical Properties of Ordinary and Polymer Concrete Containing Filling of Steel [Volume 3, Issue 1, 2010, Page 102-118]
Mahmoud, Akram S.
Evaluation the effect of some traffic characteristics on the safety performance of intersections. [Volume 11, Issue 2, 2020, Page 130-136]
Mahmoud, Akram S.
Numerical Investigations of Bond-Slip Performance in Pull-Out High Strength Concrete Specimens Subjected to Elevated [Volume 12, Issue 1, 2021, Page 20-28]
Mahmoud, Thaer
The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]
Mahmoud Ali, Talib
A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]
Majeed Abdullah, Zaki
Fuzzy Controller Parameters Optimization Based Particle Swarm Optimization Algorithm for Electro-Hydraulic System [Volume 8, Issue 1, 2017, Page 120-133]
Majid, Marwah
Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]
M. Al BAYATI, MUTHANNA
Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]
M. Al-Khateeb, Alaa
Suggested Method To Dealing With Site Course Aggregate To Product Best Concrete [Volume 2, Issue 1, 2009, Page 96-111]
M. Al-Makhyoul, Ziad
Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]
Mansoor, Yousif A.
The effect of Corroded Longitudinal Steel Bars on Flexural Behavior of Reinforced Concrete Beams [Volume 13, Issue 2, 2022, Page 122-132]
Mansor, Khalida Kadhim
Prediction of Surface Quality in Electrical Discharge Machining Process for 7024 AL Alloy Using Artificial Neural Network Model [Volume 13, Issue 2, 2022, Page 106-113]
Mansour, Khalida Kadhim
3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]
Maree, Iyd Eqqab
Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]
Mashan, Ahmed K.
Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]
Mawlood, Ibtihal A.
Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]
Medulla Mohammad, Aseel
Re-using The By-product of Cement Industry (Cement Kiln Dust) To Produce The Concrete [Volume 3, Issue 2, 2010, Page 1-14]
Mhana, Khalid Hardan
Evaluation of transportation network in AL- Fallujah city [Volume 12, Issue 2, 2021, Page 146-156]
Mhana, Mohammed H.
Evaluation the effect of some traffic characteristics on the safety performance of intersections. [Volume 11, Issue 2, 2020, Page 130-136]
M. Jaffal, Hayder
Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]
M. J. Al-Azawi, Saad
Effect Orientation on Performance of Longitudinal (Trapezoidal) Fins Heat Sink Subjected to Natural Convection [Volume 2, Issue 2, 2009, Page 69-81]
M. Mahmood, Wasan
Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]
M. Mohammed, Farag
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
Mohamed Jaleel, Saad
Effect of Strain Rate on Tensile Fracture Behaviour of Viscoelastic Matrix (EPOXY) and Fiber Reinforced Composites [Volume 1, Issue 1, 2008, Page 104-115]
Mohamed Jaleel, Saad
The Effect of the Hollow Ratio on the Natural Convection Heat Transfer from Upward Heated Plates at Constant Heat Flux [Volume 1, Issue 1, 2008, Page 131-142]
Mohammad, Ethar I.
Simulation of Storm Sewer Network Using a Storm Water Man-agement Model (SWMM), Ramadi City as a Case Study [Volume 12, Issue 1, 2021, Page 83-89]
Mohammad, S.
Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]
Mohammed, Ahmed Abdullah
Comprehensive review study for the effect of utilizing waste materials on the thermal conductivity of concretes [Volume 12, Issue 2, 2021, Page 113-120]
Mohammed, Ayad K.
Numerical Modelling and Experimental Investigation of Water Distribution in Stratified Soil Under Subsurface Trickle [Volume 11, Issue 2, 2020, Page 94-101]
Mohammed, Dilshad A.
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Mohammed, Emad A.
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
Mohammed, F.
Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]
Mohammed, Farag Mahel
Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]
Mohammed, Hussain S.
Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]
Mohammed, Jamal A.
Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]
Mohammed, Mahmoud K.
Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]
Mohammed, Mahmoud Khashaa
The effect of Corroded Longitudinal Steel Bars on Flexural Behavior of Reinforced Concrete Beams [Volume 13, Issue 2, 2022, Page 122-132]
Mohammed, Mahmoud K.
Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]
Mohammed, Najat Shyaa
Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]
Mohammed, Qutaibah M.
Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]
Mohammed, Zuhair D.
Experimental Investigation of the Optimum Angle for the Hybrid PV/T Collector [Volume 13, Issue 1, 2022, Page 1-12]
Mohammed Abed, Waleed
Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]
Mohammed Ali, Issam
Developing of a Fuzzy Logic Controller for Air Conditioning System [Volume 5, Issue 2, 2012, Page 180-187]
Mohammed Hussein, Rajab
High Temperature Cyclic Oxidation of Yttrium Modified Aluminide Diffusion Coatings of Stainless Steel [Volume 2, Issue 1, 2009, Page 61-70]
Mohammed Hussein, Rajab
High Temperature Behavior of Yttrium – Doped Siliconized 316L Stainless Steel at CO2 Environment [Volume 2, Issue 1, 2009, Page 49-60]
Mohammed Jasim, Wesam
Fuzzy Model Reference Adaptive Controller for DC Motor [Volume 8, Issue 1, 2017, Page 107-112]
Mohammed Salih, Salih
Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]
Mohammed Salih, Salih
Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]
Mohammed Salih, Salih
A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]
Mohammed Salih, Salih
Modified Key Model of Data Encryption Standard [Volume 3, Issue 1, 2010, Page 20-33]
Mohammed suwaid, Hashim
STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]
Mohson, A.
A proposed plan for implementing the public transport policy in the city of Ramadi / Anbar University as a model [Volume 12, Issue 1, 2021, Page 90-99]
Mosawi, Dr. Fareed H.
Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]
Mouthanna, Alhareth
Effect of Natural Fibers from Palm Fronds on The Mechanical Properties of Concrete [Volume 13, Issue 2, 2022, Page 69-73]
M. Salah, Wesam
Numerical Investigation of Hydrothermal Performance of Pinned Plate-Fin Microchannel Heat Sink [Volume 9, Issue 1, 2018, Page 210-232]
M. Saod, Wahran
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
Mseer Najres, Aws
A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]
Mudher, Mhaned A.
Numerical study of thermal comfort levels in a conference hall [Volume 11, Issue 2, 2020, Page 170-183]
Muhammad Ali, Suhail
ANN Based Detection and Location of Severe Three Phase Trip on the Transmission Lines of an Uncontrolled Power System [Volume 2, Issue 1, 2009, Page 36-48]
Muhsan Hasan Bdeir, Layla
Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand [Volume 5, Issue 1, 2012, Page 22-30]
Mustafa, A.
A proposed plan for implementing the public transport policy in the city of Ramadi / Anbar University as a model [Volume 12, Issue 1, 2021, Page 90-99]
Mustafa, A.
Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]
Mustafa, Ayad S.
Using water treatment sludge to Improve Geotechnical Engineering Properties of Soils: A Review [Volume 14, Issue 1, 2023, Page 50-65]
Mustafa, Ayad S.
Simulation of Storm Sewer Network Using a Storm Water Man-agement Model (SWMM), Ramadi City as a Case Study [Volume 12, Issue 1, 2021, Page 83-89]
Mutlag, S. A.
Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]
Mutlag, S. A.
Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]
Mutlag, S. A.
Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]
Mutlag, Sattar A.
Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]
N
Naif, S. M.
Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]
Najeeb ao, Ahmed A.
Numerical study of thermal comfort levels in a conference hall [Volume 11, Issue 2, 2020, Page 170-183]
Naji Hilal, Nahla
Re-using The By-product of Cement Industry (Cement Kiln Dust) To Produce The Concrete [Volume 3, Issue 2, 2010, Page 1-14]
Najim, Jassim M.
Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]
Nasser, Kadhim Zuboon
A Neural Model to Estimate Carrying Capacity of Rectangular Steel Tubular Columns Filled with Concrete [Volume 11, Issue 2, 2020, Page 192-201]
Nassrullah, Roa'a Nadhim
Performance Assessment of Universal Motor with AC and DC Supply [Volume 15, Issue 1, 2024, Page 69-76]
N. Dahham, Mohammad
Numerical Investigation on heat transfer enhancement and entropy generation in a triangular ribbed-channel using nanofluid [Volume 12, Issue 1, 2021, Page 65-75]
N.E, Ahmed
Stress Analysis of Composite Plates with Different Types of Cutouts [Volume 2, Issue 1, 2009, Page 11-29]
N.E, Ahmed
Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]
N. K, Riyah
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
N. K, Riyah
A new technique for producing high-velocity liquid-like jet [Volume 1, Issue 2, 2008, Page 118-132]
N.K, Riyah
Free Vibration Analysis of Multi-Body System [Volume 3, Issue 1, 2010, Page 1-19]
N.K, Riyah
Stress Analysis of Composite Plates with Different Types of Cutouts [Volume 2, Issue 1, 2009, Page 11-29]
N.K, Riyah
Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]
N.Kiter, Riyah
Transient Analysis of Composite Plates with Different Types of Cutout [Volume 5, Issue 1, 2012, Page 1-21]
Noaman, Ahmed Tareq
Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]
N. Sayle, Khamis
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
N. Sayle, Khamis
STUDY OF URBAN DEVELOPMENT BY APPLYING GEOGRAPHIC INFORMATION SYSTEMS AND REMOTE SENSING TECHNIQUES (FALLUJA CITY AS A CASE STUDY) [Volume 1, Issue 2, 2008, Page 143-162]
N. Sayle, Khmis
Study of Quality Control of A Survey Work in Construction Projects Case Study ( AL Rahman Mosque) [Volume 1, Issue 1, 2008, Page 143-159]
Numan, Ali Hussein
The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]
N. Uwayed, Ahmed
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
N. Uwayed, Ahmed
FREE VIBRATION ANALYSIS OF A CANTILEVER CRACKED BEAM WITH SUBSTRUCTURE ATTACHMENT [Volume 1, Issue 2, 2008, Page 39-50]
N.Uwayed, Ahmed
Transient Analysis of Composite Plates with Different Types of Cutout [Volume 5, Issue 1, 2012, Page 1-21]
O
Odah, Manal K.
A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]
Odah, Manal K.
Preparation and Application of Natural and Low Cost Palm Fibers as an Effective Drag Reducing Agent for Flow Improvement in Iraqi Crude Oil Pipelines [Volume 11, Issue 1, 2020, Page 6-11]
Omar, Najat Qader
Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]
Q
Qasim, Rasha
Study the effects of milling parameters on surface roughness for Low Carbon Steel AISI 1015 [Volume 14, Issue 1, 2023, Page 1-6]
Qwam Alden, Arz Y.
Improving Productivity Employ Simulation Model: A Case Study of a Steel Pipe Manufacturing Company [Volume 13, Issue 1, 2022, Page 35-45]
Qwam Alden, Arz
Experimental and simulation investigation of porous Functionally Graded beam under bending loading [Volume 14, Issue 1, 2023, Page 98-107]
R
Rafie Labed, Osama
Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]
Rahman M. Homadi, Abdul
An Experimental Study Of A Solar Water Heater Of Prismatic Right Triangular Cross-Section Area [Volume 4, Issue 2, 2011, Page 94-111]
Rajaa, Ahmed Imad
Performance Study of Fluent-2D and Flow-3D Platforms in the CFD Modeling of a Flow Pattern Over Ogee Spillway [Volume 11, Issue 2, 2020, Page 221-230]
Rajab, Noor A.
The Ɵptimum Decisions in Improving Sustainable Road Network Infrastructure by Using ,GIS , Graph Theory and L-matrix [Volume 11, Issue 1, 2020, Page 43-52]
Rajab, Noor A.
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
Ramadan, Dlair O.
Characterization of Rotary Friction Welded AISI 304 Steel Joints [Volume 11, Issue 2, 2020, Page 202-210]
Rashed, Mohamad F. Mohamad
Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]
R. Ibrahim, Ghalib
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
R. Ibrahim, Ghalib
FREE VIBRATION ANALYSIS OF A CANTILEVER CRACKED BEAM WITH SUBSTRUCTURE ATTACHMENT [Volume 1, Issue 2, 2008, Page 39-50]
R. Mahmood, Khalid
Nature of Soil-Water Characteristics Curves (SWCC)for Soils from Anbar Governorate [Volume 3, Issue 1, 2010, Page 61-80]
R. MOHAMMED, HAIDAR
Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]
S
Sabbar M. al-Shuqairy, Majid
The Optimum Priorities In Improving The Infrastructure Of Al-Anbar Governorate Road Network Using R.S. Data, GIS And Graph Theory [Volume 9, Issue 1, 2018, Page 281-299]
Saber, Mr Hindren Ali
Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]
Sabr, Yousif Nassif
Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]
Sahab, Mohammed Freeh
Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]
S. Ahmed, Ahmed
Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]
Salah, Tasneem
The effect of Corroded Longitudinal Steel Bars on Flexural Behavior of Reinforced Concrete Beams [Volume 13, Issue 2, 2022, Page 122-132]
S. Al-Dabbagh, Maan
Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]
Saleem Almawla, Atheer
Predicting the Daily Evaporation in Ramadi City by Using Artificial Neural Network [Volume 8, Issue 1, 2017, Page 134-139]
Salem, K.A.
Proportional Odds Nonparametric Accelerated Life Test for Reliability Prediction: An overview [Volume 5, Issue 1, 2012, Page 31-40]
S. Ali, S.
Proportional Odds Nonparametric Accelerated Life Test for Reliability Prediction: An overview [Volume 5, Issue 1, 2012, Page 31-40]
S.Ali, Yahya
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]
Salih, Dleen Mohammed
IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]
Salih, Suha Mahdi
Studying the Factors effect on Separation of Two Solid Equivalent Particle According to Density and Determination the best Separation Point [Volume 13, Issue 2, 2022, Page 22-35]
Salih, Suha mahdi
A Review on Factors Effecting The adsorption of Heavy Metal Using Different Biosorbents [Volume 15, Issue 1, 2024, Page 25-40]
Salih, T. A.
Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]
Salih, Wisam A.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
Saliha, Wisam M.
Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]
Salih Sahle, Adnan
DOA Based Minor Component Estimation using Neural Networks. [Volume 3, Issue 1, 2010, Page 49-60]
Salim, N. M.
Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]
Salim Sumait, Balasem
Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]
Salman, Suhad D.
Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]
S. Alwanb, B. Abbas
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
Sami, Hind A.
A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]
Saud Mohammed, Ahmed
Study of Soil Chemical Characteristic by Remote Sensing and GIS Techniques [Volume 4, Issue 1, 2011, Page 87-106]
S. Darwish, A.
Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]
Serheed, Saad R.
Develop QFD and AHP Models for Liquid Gas Valve for Product Developmen [Volume 11, Issue 1, 2020, Page 25-32]
SerwerYouns, Sara
Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]
Shabeeb, Alaa Hassan
Study the Effect of Cutting Parameters of Abrasive Water Jet Process on Aluminum Alloy 5083 [Volume 13, Issue 2, 2022, Page 99-105]
Shafeeq, Dhoha A.
Preparation and Application of Natural and Low Cost Palm Fibers as an Effective Drag Reducing Agent for Flow Improvement in Iraqi Crude Oil Pipelines [Volume 11, Issue 1, 2020, Page 6-11]
Shahada, A.
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
Shaker, D.
Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]
Shaker, Khalid
Optimizing Sentiment Big Data Classification Using Multilayer Perceptron [Volume 13, Issue 2, 2022, Page 14-21]
Shaker Mahmood, Akram
EXPERIMENTAL INVESTIGATION AND NONLINEAR ANALYSIS OF POLYMER MEMBERS SUBJECTED TO UNIAXIAL TENSION [Volume 1, Issue 2, 2008, Page 87-97]
Shareef, Rawaz A.
Analyzing kindergarten's Interior Spaces for Enhancing Children's Creativity Erbil City as a Case Study [Volume 13, Issue 1, 2022, Page 85-97]
Sherwany, Jaylan Haji
Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]
Sh.Mahmmod, Thaer
Evaluation of Parking Areas in Ramadi CBD [Volume 4, Issue 1, 2011, Page 131-152]
Singal, Abdullah Hamad
Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]
S. Jasim, Salah
Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]
S Mahmoud, A.
Time-dependent Numerical Modeling of Plain Concrete Columns Wrapped by FRP Sheets [Volume 9, Issue 1, 2018, Page 267-280]
S.Shibib, khalid
Temperature Distribution Through Asphalt Pavement in Tropical Zone [Volume 5, Issue 2, 2012, Page 188-197]
Sudani, Zainab Abdulelah Al
Evaluating the Effect of Supplementary Irrigation on Improvement of Economic Water Productivity for Winter Wheat [Volume 11, Issue 1, 2020, Page 60-65]
T
T. Abdul-Baki, Yousra
Effect of Soil Bulk Density on Wetting Front AdvanceUnder a Trickle Line Source [Volume 3, Issue 2, 2010, Page 78-90]
Tahaa, Hawraz .O.
Optimum performance of rotor blade with different airfoil for Primus Wind power AIR 40 Wind Turbine 12VDC [Volume 12, Issue 1, 2021, Page 57-64]
Tahir, Mohammad Rostam
Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]
Tahir, Mohammad Rostam
Sustainable Technology In The Implementation Of Prefabricated Concrete Schools [Volume 14, Issue 2, 2023, Page 53-63]
T. Ahmed, sabah
An Experimental Study Of A Solar Water Heater Of Prismatic Right Triangular Cross-Section Area [Volume 4, Issue 2, 2011, Page 94-111]
Takialddin, al smadi
Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]
T. Al, Ahmed
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
T. Al, Ahmed
ANALYSIS OF MULTI-LAYER COMPOSITE SIMPLY SUPPORTED BEAM UNDER BLAST LOADING [Volume 1, Issue 2, 2008, Page 98-117]
Tariq Chaichan, Miqdam
Practical Investigation for Improving Concentrating Solar Power Stations Efficiency in Iraqi Weathers [Volume 5, Issue 1, 2012, Page 76-87]
Tarlochan, F.
Proportional Odds Nonparametric Accelerated Life Test for Reliability Prediction: An overview [Volume 5, Issue 1, 2012, Page 31-40]
T. Fadhil, Obaid
Numerical Investigation of Hydrothermal Performance of Pinned Plate-Fin Microchannel Heat Sink [Volume 9, Issue 1, 2018, Page 210-232]
T. Fadhil, Obaid
Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]
T.Fadhil, Obaid
Thermal Performance of a Heat Pipe with Sintered Powder Metal Wick Using Ethanol and Water as Working Fluids [Volume 4, Issue 1, 2011, Page 62-71]
T. Faraj, Sufyan
Key Exchange Protocol Supporting Mobility and Multihoming [Volume 1, Issue 1, 2008, Page 11-30]
T. Faraj, Sufyan
Unconditionally Secure Authentication in Quantum Key Distribution [Volume 1, Issue 1, 2008, Page 59-76]
Thabit, Rana Salah
The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]
Thaer Sh. Mahmood, Dr.
Strategic planning for land use in Iraqi cities city Hit [Volume 7, Issue 1, 2016, Page 1-6]
Thameel, S.
A proposed plan for implementing the public transport policy in the city of Ramadi / Anbar University as a model [Volume 12, Issue 1, 2021, Page 90-99]
Thamer Nazzal, Ibrahim
Experimental Study Of Vegetable Oil -Diesel Blends On The performance Of Compression Ignition Engine [Volume 4, Issue 2, 2011, Page 33-44]
T. Hamidi, Saad
Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]
T. Nawar, Mohammed
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
T Salih, Z.
Time-dependent Numerical Modeling of Plain Concrete Columns Wrapped by FRP Sheets [Volume 9, Issue 1, 2018, Page 267-280]
W
Waji Salem, Juma
A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]
Warsh, Waleed A.
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]
Yahya Rzayeg, Arz
Effect of Strain Rate on Tensile Fracture Behaviour of Viscoelastic Matrix (EPOXY) and Fiber Reinforced Composites [Volume 1, Issue 1, 2008, Page 104-115]
Yahya Rzayeg, Arz
The Effect of the Hollow Ratio on the Natural Convection Heat Transfer from Upward Heated Plates at Constant Heat Flux [Volume 1, Issue 1, 2008, Page 131-142]
Yahya Rzayyig, Arz
Effect of Cutouts on the Behavior of Clamped Rectangular Plates [Volume 4, Issue 2, 2011, Page 45-59]
Yaseen, Mohammed Jameel
Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]
Yaseen, Mohammed Jameel
Sustainable Technology In The Implementation Of Prefabricated Concrete Schools [Volume 14, Issue 2, 2023, Page 53-63]
Yaseen Abbood, Mazin
Dynamical effects of the impact of falling mass on stiffened rectangular plate [Volume 5, Issue 1, 2012, Page 64-75]
Yassen, Muheeb
Hoff's Investigation of The Sandwich Panel with Honeycomb Core [Volume 13, Issue 2, 2022, Page 63-68]
Yousif, Omaima A.
Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]
Yousif, Yasameen Tahseen
The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]
Y. R, Arz
TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]
Y. R, Arz
STUDYING THE EFFECT OF CUTOUTS ON THE COMPOSITE LAMINATE PLATES [Volume 1, Issue 2, 2008, Page 69-77]
Y.R, Arz
Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]
Yusoh, Kamal Bin
Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]
Z
Zaghar, Dhafer R.
New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]
